PRO I/O-60 (G3) Home automation and external devices control, additional indication, autoopening – for 60 mm installation box

PRO I/O-60 (G3) Home automation and external devices control, additional indication, autoopening – for 60 mm installation box

52,84€

Available on backorder

Available on backorder

SKU: PRO I/O-60 (G3)

Η μονάδα διαθέτει έξοδο ρελέ: ένα ζεύγος επαφών τύπου NO/NC 5A/24VDC και είσοδο τύπου NO για σύνδεση ενός κουμπιού NO. Δίνει τη δυνατότητα σύνδεσης και λειτουργίας πρόσθετων συσκευών, π.χ. έλεγχος οικιακού αυτοματισμού, γκαραζόπορτα,  φωτισμός, ρολά και σύνδεση συσκευών σηματοδότησης κλήσεων. Επιτρέπει επίσης τη σύνδεση εξωτερικού κουμπιού για άμεση ενεργοποίηση του ηλεκτρικού χτυπήματος της πόρτας στον πίνακα, αυτόματο άνοιγμα της πόρτας όταν χτυπάει ο δέκτης και κλήση της λειτουργίας κουδουνιού πόρτας (δακτύλιος δέκτης).

Διαθέτει ασφαλή λειτουργία ελέγχου ανοίγματος πόρτας: το ηλεκτρικό χτύπημα πόρτας συνδέεται με τη μονάδα PRO-I/O (αντί του πίνακα) και ο πίνακας ενεργοποιεί το απομακρυσμένο άνοιγμα μέσω του διαύλου συστήματος.

Σχεδιασμένο για τοποθέτηση σε κουτί εγκατάστασης Ø60mm. Συμβατό με όλες τις συσκευές από την ομάδα COMO/ Familio PRO, PRO-A.

Αυτή είναι η επόμενη γενιά της μονάδας (G3), η οποία υποστηρίζει, μεταξύ άλλων, μεγαλύτερο αριθμό διευθύνσεων (π.χ. για πάνελ της σειράς COMO-PRO, οθόνες της σειράς GLASS-PRO-7) και επίσης επιτρέπει ρυθμίσεις προγραμματισμού και ενημερώσεις λογισμικού σε ο δίαυλος συστήματος μέσω υπολογιστή.

Η αξιοπιστία, η καινοτομία και η ανθεκτικότητα είναι τα χαρακτηριστικά της μάρκας ACO.

Description

Index PRO I/O-60 (G3)
Description Extension module to support additional devices
Material Without housing
Dimensions 50x50x20
Mounting Surface-mounted
Installation type – Digital PRO system: cat. 5e or 6
– PRO-A digital system: 3 wires
Stand-by power consumption ~0,6W
Power supply 15VDC / 40mA
Outputs 3 x screw terminals (relay output):
– NO/N/N/NC relay contacts, max. 5A, 24VDC
Inputs 3 x screw terminals (PRO system bus connection):
– audio signal connection: “LINE”.
– power supply connection: “+DC” and “-DC”
2 x screw connection (NO input)
– connection of normally open buttons, e.g. a bell button
Attributes Activation of the output for 1s will take place:
1. after pressing the F2 key in the receiver
2. after selecting a code in the panel preceded by double pressing the “key” key
3. after applying the ACC proximity key fob preceded by pressing the “key fob”
(the output activation time can be modified by using the computer program and optional PRO-USB computer interface.
– the relay output can operate in monostable (momentary, according to the set time) or bistable mode (each time the relay is activated it changes its state to the opposite – from ON to OFF and vice versa)
– opening the door at any time (no need to answer the call)
– automatic opening of the door during ringing (possibility of remote activation of this option with the aid of e.g. a clock)
– possibility of connecting an additional acoustic or light device signalling ringing in the premises
– it is possible to operate the module independently without the receiver and in parallel with the receiver
– the function of activating the output each time the door is opened in the panel (the time of activating the output is consistent with the time of opening set in the panel (does not apply to opening from the INPUT of the panel)
– secure door opening control function: the electric door strike is connected to the module and the panel activates opening remotely via the system bus (in this case the electric door strike is not directly connected to the panel)
– the functions performed are selected by means of switches on the module
– switching on the relay output and reaction to the input can be assigned to the container address of the receiver or to all receivers (regardless of the address)
– supports receiver addresses: 31 addresses (programmed with switches on the module) or 1023 addresses (programmed from a computer using optional PRO-USB interface)
– for address 0 the module cooperates with all addresses in the system
– the relay functions can be additionally limited depending on the address of the Intercom receiver (this option can be modified only by means of a computer program and an optional PRO-USB computer interface)
– compatible with the entire PRO system
Example of application:
– home automation: control of external devices, e.g. lighting, roller blinds, etc.
– control of the second gate: e.g. entrance gate, barrier
– as a doorbell
– as a ringtone at an entrance where there is no external panel
– additional ringing tone indication
– additional manual/automatic door release
– various uses in the premises of people with disabilities
– relay activation during door opening in PRO system (does not apply to opening from INPUT of panel) – function supported by FAM-PRO panels in software version from v1.1.5 or for COMO series panels regardless of software versionOther functions related to the 3rd generation of the module:
– programming of settings and software update on the system bus (PRO-USB computer interface required)
– compatible with previous generations of the PRO system
– individual number of each device: DevID
– search for all devices in the system
– individual or group facility management
– possibility to manage devices and update them in a working system
– one software to handle all devices: PRO 3 Manager

Additional information

Weight

2kg

Σχετικά Προϊόντα

Τίτλος

Κατάστημα

Αποστόλου Παύλου & Ευποϊίας
Κόρινθος TK 20100
electrosupplypc@gmail.com
Τηλ: +30 2741074575

Εξυπηρέτηση Πελατών

Τρόποι πληρωμής
Αποστολή προϊόντων
Επιστροφές προϊόντων
Όροι χρήσης
Ασφάλεια Συναλλαγών
Cookies

© Copyright electrosupply. All Rights Reserved | Πολιτική Προστασίας Προσωπικών Δεδομένων

Translate »
Go to Top