MOD-SPK-PRO (G3) Ενσωματωμένη μονάδα ήχου για ψηφιακά συστήματα PRO και PRO-A

MOD-SPK-PRO (G3) Ενσωματωμένη μονάδα ήχου για ψηφιακά συστήματα PRO και PRO-A

Συνδεθείτε για να δείτε τιμές χονδρικής

Διαθέσιμο κατόπιν παραγγελίας


Kύρια μονάδα ήχου για ενσωματωμένη εγκατάσταση. Χρησιμοποιείται π.χ. σε προσόψεις με εξωτερικά κουμπιά κλήσης ή για σύνδεση γραμματοκιβωτίου με σύστημα εισόδου πόρτας. Το MOD-SPK-PRO (G3) είναι μια συνέχεια και ταυτόχρονα η επόμενη γενιά ενσωματωμένων μονάδων. Η μονάδα έχει λειτουργίες παρόμοιες με αυτές της σειράς COMO-PRO.

Η μονάδα σάς επιτρέπει να πραγματοποιείτε κλήση σε ένα διαμέρισμα μέσω της ενσωματωμένης εισόδου NO. Είναι δυνατή η σύνδεση εξωτερικών κουμπιών κλήσης χρησιμοποιώντας τις προαιρετικές μονάδες MOD10NBP, οι οποίες καθεμία επιτρέπει τη σύνδεση άλλων 10 κουμπιών. Εάν αγοράσετε μια προαιρετική ενσωματωμένη μονάδα κάμερας MOD-CAM-FAM, είναι δυνατή η επέκταση του συστήματος ήχου σε βίντεο.

Συμβατό με όλες τις ψηφιακές συσκευές που λειτουργούν σε συστήματα Familio/COMO (PRO και PRO-A).


Index MOD-SPK-PRO (G3)
Description Built-in main unit module for PRO and PRO-A digital systems
Dimensions (mm) 138x76x34
Material Stainless steel
Max. number of subscribers 1 or more after connecting the optional MOD-10NBP
Installation type Digital PRO system: min. 3 wires (Audio) or twisted pair cat. 5e or 6 (Audio/Video)
Stand-by power consumption 15V DC / 400mA
Power supply ~ 2,5W
Outputs 2 x detachable screw connectors:
– connection of a conventional door strike (max. 1.5A) or connection of a reversing door strike (max. 1.5A) or a CDN-PK relay module
(contact rating max. 5A)
5 x disconnectable screw connectors (PRO / PRO-A system bus connection):
– audio signal connection: “LINE”
– power connection: “+DC” and “-DC”
– connecting the video signal: “V+” and “V-”
1 x Rj45 connector:
– connection of the PRO / PRO-A system bus
Inputs 1 x “INPUT” disconnectable screw terminals:
connection of NO push-button – activated after shorting to the system GND. E.g. “bell” button for direct ringing (or, after changing the
settings, for activation of the electric door strike with a delay of up to 25 seconds).
2 x “ELOCK POWER” disconnectable screw terminals:
connection of separate power supply for the electric door strike output
1 x “CAM” socket. to connect an optional MOD-CAM-FAM camera module
1 x “EXTMOD” socket for connecting an optional module for 10 call buttons (MOD-10NBP)
1 x “ANT” connector for connecting an external antenna of the proximity key fob reader
1 x “MIC” connector to connect an external microphone
Attributes – possibility of any kind of installation (front, letterbox)
– intuitive and comfortable operation and easy configuration
– weatherproof and vandalism resistant
– access control – proximity key fob reader with external antenna
– keyring(fob) programmed in the set (with the possibility of opening the door and adding another 9 key fobs)
– possibility to use up to 10240 proximity fobs, including 10 each assigned to the apartments + 10 administration (programmed from the
– programming and updating the module’s software from the computer using the optional CDN-USB or PRO-USB interface
– acoustic information in the apartment about opening the door (calling) – only for key fobs assigned to the apartment (possibility to
disable the function from the computer)
– Support for multiple expansion modules to increase system functionality
– Home automation: control of external devices, e.g. entrance gate, barrier, lighting, roller shutters (optional PRO-I/O module
connected to the system bus required)
– possibility of connecting multiple call receivers at the same time
– Receiver presence detection (The module will not call if there is no receiver)
– possibility of connecting different types of electric door strikes
– output for direct connection of the electric door strike
– possibility of controlling an electromagnetic jumper
– possibility of powering the output to connect the door strike from a separate power supply (DC or AC)
– possibility of connecting an external opening button
– option of protected door opener control: the electric door strike is connected to the optional PRO-I/O module (relay contacts) and the
panel activates opening via the system bus
– possibility of connecting an additional acoustic device in the apartment
or a light signal ringing (optional PRO-I/O module connected to the system bus required)
– compatible with all digital operating devices in Familio/COMO PRO and PRO-A systems
– possibility of connecting an external camera in the system (additional MOD-CAM-FAM module and UTP cat bus are required. 5e or 6)
New features of MOD-SPK-PRO 3rd generation:
– connection of two panels / modules in one system: 1 x master and 1 x slave
– Adding and removing proximity fobs with the “master” key fob (separately for
each apartment) and using the “super master” key fob (in all apartments)
– programming of settings and software update on the system bus (PRO-USB computer interface required)
– compatible with previous generations of the PRO system
– the individual number of each device: DevID
– searching for all devices in the system
– individual or group management of devices
– possibility to manage devices and updates in a working system
– one software to operate all devices: PRO 3 Manager
– freeware

Επιπλέον πληροφορίες




Go to Top